loading

Established in 1999, FUYU door lock has gradually become one of the most famous door lock manufacturers in China because of high quality, high added value, variety and variation.

Analysis of the top ten problems that often occur after installing a smart lock at home-media reports

Nowadays, more and more people choose smart locks, because the door can be opened with a light movement of a finger or a blink of an eye! However, as more people are used, various problems will arise. Today, Fuyu Electronic Smart Lock is here to sort out the problems we may encounter when using the smart lock~~1, there is no response after installation 1. Confirm that the battery with sufficient power is installed and the positive and negative poles of the battery are correct. 2. Remove the rear panel to check whether the wires are connected or whether they are tightly connected. 3. Remove the lock body to check whether the lock body wires are squeezed and re-arrange the wires. 2. The lock is out of power! ! If the battery of the smart lock is low, there will be a voice prompt. So you need to replace the battery in time. The smart lock has been used for about half a year to 1 year. It is best to open the battery cover to check the battery to prevent the battery electro-hydraulic from corroding the fingerprint lock circuit board (especially in the rainy season. There are hidden dangers, please check and maintain them in time, and use home appliances correctly). If the battery is oxidized, please replace it with a new good quality battery! 3. The smart lock has been used for a long time, and the surface is dim. Do not let the lock surface come into contact with corrosive substances, otherwise it will damage the lock surface protective layer, affect the gloss of the lock surface or cause the surface coating to oxidize. Imagine applying chili noodles on your face, do you feel the faint worries of the lock... 4. The fingerprint verification succeeds but the lock cannot be unlocked 1. There are two important components in the fingerprint lock: one is the fingerprint module, and the other is the electronic clutch. When the verification is successful, listen carefully for the sound of the motor rotating in the lock. If there is no sound of the motor rotating, the line from the circuit board to the motor may be broken. There is a rotating sound from the motor, it may be that the square rod inside the handle has fallen off. At this time, it is best to contact the after-sales service! 2. The door is skewed, causing excessive friction between the lock tongue and the gusset plate, and the door cannot be opened. 5. Touch-sensitive keyboard, the screen does not respond. 1. Check the battery box to make sure that the battery power is sufficient and the positive and negative poles are installed correctly; 2. Whether the working mode is fingerprint mode (the touch button does not respond in fingerprint mode). 6. I feel that the fingerprint reading is a bit slow. After installing the smart lock, you must try it madly and repeatedly to confirm that there is no problem before letting the installer go. If the response is slow after installation for a period of time, consider that the fingerprint collection window has been used for a long time, the surface will be stained with dirt or the surface is damp, wipe it gently with a dry soft cloth, pay attention, it is a dry soft cloth ~ iron shavings are not suitable... 7. You cannot delete the fingerprint or modify the password to confirm whether the current fingerprint is an administrative user fingerprint. If it is not, you cannot change the fingerprint password. To manage fingerprints or change passwords, please follow the correct steps. 8. The smart lock handle does not turn smoothly. 1. The panel is installed crookedly, resulting in excessive friction between the lock body and the panel. Please adjust the panel position. 2. After the fingerprint is successfully matched, the handle has not been turned for a long time. Please re-enter your fingerprint to open the door. 9. The display prompts that it is locked. This is a situation that occurs when the fingerprint or password is entered incorrectly for multiple times. Generally, wait for 3-5 minutes, the smart lock will automatically unlock, and no operation can be performed on the display during the lock. This is the anti-theft setting of the system. Don't try to open it by violence~ 10. There is a problem with the anti-theft door, which will affect the smart lock. At this time, the position of the door buckle plate should be adjusted, otherwise, the smart lock will also deform and cause problems!

For the study, researchers defined FUYU as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.

We want to continue to organize FUYU to make it more efficient and profitable so that both, our clients and our employees can get more out of their time.

There are different types of , mainly custom door lock and custom door lock.

Along the way, Zhongshan Fuyu Hardware Products Co., Ltd. will face a wide range of challenges. The most successful will show our resolve by working through the challenges and finding ways to improve and grow.

Zhongshan Fuyu Hardware Products Co., Ltd. will do this by managing our business with integrity and the highest ethical standards, while acting in a socially responsible manner with particular emphasis on the well-being of our teammates and the communities we serve.

GET IN TOUCH WITH Us
recommended articles
200 ask INFO CENTER FAQ
In recent years, the second and third-tier brands in a certain county-level regional market will be turned into mainstream brands by their distributors; a distributor that has only been one or two years old can achieve tens of millions of sales...
On the occasion of the 'August 1st' Army Day, in order to enhance the emotional exchanges with the army officers and soldiers, and to talk about the friendship between the army and the people, Ningbo Daxie Development Zone Jiajie Zinc Casting Co., Ltd.
The seven-day National Day holiday was fleeting, and after a week of hard work, it was finally possible to celebrate Friday.
Smart lock, we should be no stranger to it, more or less have a certain understanding of it.
Just after the May Day holiday, it means that summer is here.
Smart locks are getting more and more attention and favor from everyone.
In 2108, the smart lock industry broke out with the era of fine decoration, allowing smart locks to gradually come into our daily lives.
Regardless of whether you already own the fingerprint lock, a little thing that greatly enhances the happiness of life, you may have been confused and hesitated about the price of the fingerprint lock.
Huanhuan has been in the fifth grade this year, and her study pressure is getting more and more intense.
no data

 

In future, we will always try our best to make high quality, popular and reliable chinese door lock products for our customers.

CONTACT US

Contact Person: Abby zhang

Tel: 0086-760-22138650

E-mail: sales8@lokinlock.com

MOB: 0086 180 24816938

ADD: Liansheng Nan Road, Lianfeng Industrial Zone, Xiaolan town, Zhongshan city, Guangdong Province, 528416, China 

BETTER TOUCH BETTER BUSINESS

Copyright © 2025 Zhongshan City Fuyu Hardware Products Co., Ltd. | Sitemap
Contact us
wechat
whatsapp
Contact customer service
Contact us
wechat
whatsapp
cancel
Customer service
detect