Installation method of magnetic lock

Magnetic lock is using the principle of electric raw magnetic, when an electric current passes through the silicon steel sheet, tightly absorb electromagnetic lock will produce a powerful suction adsorption iron plate to achieve the effect of locking the door when you leave. So you know we at the time of installation magnetic locks, is how to install? Below to share magnetic lock installation method is as follows: 1, the embedded type: embedded type ( Built-in) Open the door and open the door in the embedded installation methods are consistent, for wooden door, if the size of the gate guard embedded lock body is enough, installation is very simple, just dig a suitable tank, lock the screw can lock has been buried in the general construction personnel see lock will be installed. 2, the surface type: open the door to do surface installation auxiliary parts are needed to assist in installation, rich decorative of imported aluminum to make the installation accessories Z& L bracket. Z& first; L stents in the L1 in the lock position, with self-tapping screws on the frame or metope; Main body with a hexagonal wrench will lock lock on L1 support; The corresponding to the position of the bracket of L1 Z2 bracket on the door; Will follow the iron plate insert Z1 false fixed in three holes, then the door close, make the magnet and the iron plate tightly, determine the Z1, Z2 cohesion; Z1, Z2 locking, then the plate with the M8 * 25 screws on the Z1, screw, iron plate, gasket, rubber washer through in turn. Magnetic lock installation method is mainly to share these above, we all need magnetic locks, can be carried out in accordance with the above installation method to install.