Magnetic lock door installation drawing

Magnetic lock is using the principle of electric raw magnetic, magnetic lock will produce strong suction tightly to absorb adsorption iron plate to achieve the effect of locking the door when you leave. So we all generally when installing magnetic locks, should how to install? Magnetic lock door installation drawing magnetic lock installation method is as follows: step 1: use a screwdriver to open the cover plate, and then with a hexagonal wrench side plate, ready to install the step 2: take out installed cardboard, the cardboard fold along the dotted line put cardboard in required for the position of the lock, then need to punch holes after make the mark. Step 3:1, the iron plate fixed, insert the Allen screw in the iron plate, the rubber washer between two pieces of metal washers, and then set, hexagonal screw. 2, fixed plate, the plate with two cup head screws in previously punched on the door frame. 3, the position of the fixed plate, the side plate and the plate position, to make lock body can be closely contact with the iron plate. 4, fixed lock body and plate after locking plate round head screw, locks and all the countersunk head screw, drilling in place so that connection. Step 4: in accordance with the instruction of the manual wiring. Step 5: cover plate, lock small aluminum cylinder into the main body of the screw holes. All of us at the time of installation magnetic door lock, can be carried out in accordance with the above installation method to install, correct installation magnetic locks are all of us need to know.