Maintenance method of smart lock

The maintenance methods of the smart lock are as follows: 1. To ensure that the fingerprint lock is clean and tidy, check the technical status of the lock body regularly. When collecting and registering fingerprints, the finger strength is moderate. Do not apply pressure strongly. You can wipe the fingerprints with a lens cloth. Collect window dust, because after a long time of use, there will be dirt on the surface, which may affect normal use. 2. Protect the shell from being scratched. The shell of the fingerprint lock generally adopts zinc alloy and electroplating process.　　The electroplating process can achieve a perfect balance between wear resistance and aesthetics, but if you encounter hard objects, such as stones, blades, etc., scratches will easily occur, which will affect the aesthetics of the entire lock. Especially the acrylic digital panel, which is easy to wear, must be protected. Therefore, bear child, we should guard against it.　　3. Enough lubrication to protect the lock cylinder　　As one of the most important mechanical structures of a fingerprint lock, the lock cylinder naturally cannot ignore maintenance. When you find that the lock cylinder is not very flexible or can not maintain the accurate position, you should fill the lock cylinder with lubricating oil in time. Pay attention when refueling, use a grease gun to inject oil into the lock core, and do not overdo it. Roll the handle and knob until the door lock is activated.　　4. Regularly check and replace the battery 　　 When the Kebel fingerprint lock encounters low battery power, it will give an alarm at least two weeks in advance. Please replace the battery in time after hearing the alarm to avoid affecting normal use.　　 If the battery cannot be opened due to no low battery, you can use an emergency power bank or use the emergency key to unlock the lock.　　 5. Don’t hang heavy objects on the handle. 　　 The handle is also an important part of a lock. Please do not hang heavy objects on the handle, it is best not to hang any objects, so as to avoid long-term pressure on the handle and damage the balance of the handle. As a result, the spring in the handle is stretched, and the handle naturally sags.　　6. u200bu200bSturdy lock body, pay attention to waterproof 　　 If the shell comes into contact with liquid or salt spray, please wipe it dry with a soft, absorbent cloth or paper towel. You can also use a lens cloth to wipe the fingerprint collection window dust, because after a long time of use, there will be dirt on the surface, which may affect normal use.　　 The above is the six little knowledge about smart lock maintenance. Consumers only need to keep in mind. Daily maintenance of smart locks can enjoy the convenient life brought by smart locks.
However, with the increased prevalence of lock manufacturing, it has become far more affordable.
Being a performance leader means Zhongshan Fuyu Hardware Products Co., Ltd. will achieve operational excellence, industry-leading customer satisfaction and superior financial performance.
Our company is professional in selling lock manufacturing as well as providing a series of relevant services.
lock manufacturing is receiving a great positive feedback in the market. And many of our clients are fully satisfied with it.