Magnetic lock design and electromagnet, when an electric current passes through the silicon steel sheet, tightly absorb electromagnetic lock will produce a powerful suction adsorption iron plate to achieve the effect of locking the door when you leave.
So we at the time of installation magnetic locks, is usually how to install magnetic locks?
Magnetic locks standard installation method is as follows: 1: use a screwdriver to open the cover plate, and then with a hexagonal wrench side plate, ready to install 2: take out the installation board, the cardboard fold along the dotted line as shown in figure 2 methods put cardboard in required for the position of the lock, then need to punch holes after make the mark.
The Allen screw in the iron plate fixed will insert the iron plate, the rubber washer between two pieces of metal washers, and then set, hexagonal screw.
Insert the iron plate on the door of the three holes, inserted the mushroom head from the other side of the door at the same time, will follow the iron plate with hex wrench locks on the door.
The edge plate fixed plate with two round head screws in previously punched on the door frame (
Fixed in long hole plate)
Correct the position of the plate to make the position of the side plate and the iron plate, right to make the lock body can closely contact with the iron plate.
D: fixed lock body and the side plate after locking plate round head screw, locks and all the countersunk head screw, and then unload the cup head screws, drilling in place so that connection.
Main body lock the lock with a hexagonal wrench on the plate.
4: in accordance with the instruction of the manual connection.
5: cover plate, the small aluminum cylinder into the lock screw holes of main body as shown in figure 5.
As shown in figure 7 and figure 8 open the door for typical outside the installation of external type style all of us at the time of installation magnetic locks, can be installed from the above several methods of magnetic lock to install.